Operating Conditions - Alcatel-Lucent 300 DECT User Manual

Precautions for use

Operating conditions

The following conditions must be respected, notably concerning the use of radioelectric
frequencies:
• DECT equipment can only be used to establish links between fixed points if these links are
temporary and the equivalent isotropically radiated power at the antenna is less than 250
mW.
• This telephone is specially designed for use with an Alcatel-Lucent system such as is
described in the manual.
• As this telephone complies with the GAP standard, it can be used in simplified mode on
another DECT/GAP system (other PABX or private residential base station). Utilization in
GAP mode involves a particular mode of operation that can lead to functional limitations for
which no claims will be considered under the terms of the guarantee.
• Switch off the telephone before changing the battery.
• Do not expose your telephone to severe conditions (rain, sea air, dust, etc.).
• Correct operation of your telephone is not guaranteed at temperatures outside the range -
10°C to +45°C.Between -5ºC and -10ºC the display may not be readable. This is a
temporary phenomenon and does not affect the performance of your telephone in any way.
• A volume level that is too high can cause irreparable loss of hearing. Adjust the sound
volume of your handset to a reasonable level.
• You must not switch on or use your telephone near gas or inflammable liquids.
8