Sending Dtmf Signals; Sending A Calibrated Cut-Off; Programming Your Personal Directory - Alcatel-Lucent 300 DECT User Manual

8
Using the telephone in GAP mode
8.5

Sending DTMF signals

During a call, you sometimes have to send DTMF signals, for example, for a voice message service,
an automatic switchboard or when remotely consulting an answering machine. To do this:
Press the star key (hold down for a few seconds). ( star :
8.6

Sending a calibrated cut-off

The calibrated cut-off activates functions such as transfer to another telephone set.
To make a calibrated cut-off:
Press the 0 key (hold down for a few seconds).
8.7

Programming your personal directory

Your directory can contain up to 12 numbers
select the 'directories' function
apply
apply
To key in the name : the keys in the numeric keypad include letters
that you can display by pressing them successively. Example: press
twice in succession on 8 to display the letter 'U'.
To insert a pause in a number, press the 1 (hold down for a few
seconds).
To insert a measured break, press 0 (hold down for a few seconds).
42
123
123
1-Edit
2-Delete
3-Call
123
0123456789
enter the number
select the chosen card
apply
Number?
)
123
1-............
2-............
3-............
123
Name?
MARTIN
enter the name (10 characters
maximum)
apply return to idle