Hampton Options; Hampton Cast Faceplate - Regency P36-NG4 Owners & Installation Manual

®
HAMPTON OPTIONS
1) Remove top louver.
2) Open bottom louver.
3) Install the left side faceplate by pushing in at the side of the fi rebox
and line up with top and bottom holes on side. Secure with screws,
tighten loosely.
Secure bottom of
faceplate with screw.
4) Repeat step 3 for the right side faceplate.
NOTE: Do not push in side faceplates all the
way, allow for room to place the top faceplate.
56
®
HAMPTON CAST FACEPLATE
Secure top of
faceplate with screw.
5) Slide top piece of faceplate into side faceplates by fi tting mounting
plates into brackets.
Top piece
Faceplate
Mounting
Plate
Side piece
Faceplate
6) Push in both side faceplate pieces and completely tighten
screws.
7) Re-install top louver.
8) Close bottom louver.
FPI P36-4 Zero Clearance Direct Vent Gas Fireplace
(Back View)
Bracket on back of
side faceplate.