Initialization #2 (Tractor) - AMT Datasouth Accel-7450 Manual

Initialization #2 (Tractor)

Scope:
This function is used to calibrate and set rear tractor media sensor thresholds.
Procedure:
1. Select control panel
2. With the printer power turned OFF and no paper loaded, press and hold the
ONLINE and EJECT/LOAD keys while turning ON the printer power switch. Hold
keys until printer initialization (carriage movement) is completed. The LCD
display will read "EEPROM INITIAL 2, TRACTOR MODE ".
3. The paper will feed into the printer comparing open and closed tractor sensor
readings to set the appropriate media in/out thresholds.
4. The initialization process is completed when the printer returns to a READY
state.
END OF PROCEDURE
AUTO
print gap, and Tractor
7
ACCEL-7450
modes.