Electrical Connections
10.4 Installation Instructions for Control Panel MC04/05
The Control Panel should be installed in a suitable location (on a flat surface if possible) in the area visible to the driver.
– Use Drilling Template for Control Panel MC04/05 for cut-out and holes (see"Drilling templates")
– Connect Control Panel to existing connectors on heater-unit wiring harness (see "Connection diagram/Circuit
diagram")
– Pre-mount control unit in cut-out
– Lightly press fastening screws into holes and screw in
– Carefully clip on trim frame
NOTES:
•
Control Panel is only intended for installation in passenger compartment
•
Ensure good readability when selecting installation location
•
Observe information on adhesive labels and colored markings when connecting Control Panel to vehicle wiring
harness
Figure 32. Installing Control Panel MC04/05
Webasto Product N.A., Inc.
22
Air Top Evo 3900/5500
www.techwebasto.com