Panasonic KX-TD500 Installation Manual page 216

4.2 Diagnosis
Item
Card
Result
Error
Indication
Error Message
Card link error
Card type error
ROM error
216
Notes
• After executing (or cancelling) the Card Test, go back to "Diagnosis - Card
Information" screen by pressing
"OUS (Out-of-Service)" to "INS (In-Service)."
• Executing the DISA card test erases the pre-recorded OGM and a beep tone will
be recorded automatically instead of the OGM.
• When executing the T1/E1 card test, set the DIP Switch on the T1/E1 card to
"TEST" position.
[Card/Port Test] Card Test - Description
Display/Input Value
Card No. : Type
OK
NG
See "Error Indication
Table."
[Card/Port Test] Card Test - Error Indication Table
Data link between the selected card and the PBX
is abnormal.
Card assignment does not match the card type
installed to the free slot.
Card ROM is not functioning properly.
button and change the card status from
Description
The card number and the type of the target
card to be diagnosed. (The card specified in
"Card Information" screen is displayed
automatically.)
The results of diagnosis.
The details of an error.
Displayed only when Result is NG (no
good).
Description Card
Applied
Utility