2.10 Starting Up the KX-TD500 System
Starting up the system with system data programmed by Maintenance PC, or using the
saved data.
After installing the optional cards required, execute the following procedures.
Power ON reset or Press
the RESET button
"OFF-LINE" LED flashes
Upload system data
Press the RESET button
Note
• System programming from Maintenance PC can be done in on-line mode.
• When "OFF-LINE" LED flashes, system start-up is completed. After this, system
programming from the Maintenance PC can be done.
176
START
MODE=4
SYSTEM=0
On-line Mode
MODE=0
SYSTEM=0
END
Off-line Mode
Installation