Alarm Configuration - TP-Link TL-SG3424 User Manual

reAuthEnabled:
Choose whether regular authentication will take place in this port.
Default: ON
reAuthPeriod(1-65535 s):
A non-zero number seconds between the periodic re-authentication of
the supplicant.
Default: 3600
max. Request(1-10):
The maximum of number times that the authenticator will retransmit an
EAP Request to the supplicant before it times out the authentication
session. The valid range: 1 – 10.
Default: 2 times
suppTimeout(1-65535 s):
A timeout condition in the exchange between the authenticator and the
supplicant. The valid range: 1 –65535.
Default: 30 seconds.
serverTimeout(1-65535 s):
A timeout condition in the exchange between the authenticator and the
authentication server. The valid range: 1 –65535.
Default: 30 seconds
Fig. 3-59
125
User Manual
Publication date: January, 2006
Revision A2
User Manual

3-16. Alarm Configuration

Alarm Configuration
Function name:
Events Configuration
Function description:
The Trap Events Configuration function is used to enable the switch to send
out the trap information while pre-defined trap events occurred. The switch
offers 24 different trap events to users for switch management. The trap
information can be sent out in three ways, including email, mobile phone SMS
(short message system) and trap. The message will be sent while users tick
( ) the trap event individually on the web page shown as below.
Parameter description:
Trap: Cold Start, Warm Start, Link Down, Link Up, Authentication
Failure, User login, User logout
STP: STP Topology Changed, STP Disabled, STP Enabled
LACP: LACP Disabled, LACP Enabled, LACP Member Added,
LACP Port Failure
GVRP: GVRP Disabled, GVRP Enabled
VLAN: VLAN Disabled, Port-based VLAN Enabled, Tag-based VLAN
Enabled, Metro-mode Vlan Enabled, Double-tag Vlan Enabled
Module Swap: Module Inserted, Module Removed, Dual Media Swapped
Publication date: January, 2006
Revision A2
126
Events Configuration
Email/SMS Configuration