Tag-Based Group - TP-Link TL-SG3424 User Manual

3-10-2. Tag-based Group

Function name:
Tag-based Group Configuration
Function description:
It shows the information of existed Tag-based VLAN Groups, You can also
easily create, edit and delete a Tag-based VLAN group by pressing <Add>,
<Edit> and <Delete> function buttons. User can add a new VLAN group by
inputting a new VLAN name and VLAN ID.
Parameter description:
VLAN Name:
The name defined by administrator is associated with a VLAN group.
Valid letters are A-Z, a-z, 0-9, "
length is 15 characters.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based and Double-tag mode.
SYM-VLAN:
While the SYM-VLAN function of the group is enabled, all packets with
this group VID will be dropped in case they are transmitted from the ports
that do not belong to this group.
Member:
This is used to enable or disable if a port is a member of the new added
VLAN, "Enable" means it is a member of the VLAN. Just tick the check
)
box ( beside the port x to enable it.
Fig. 3-31
83
User Manual
-
" and "_" characters. The maximal
Publication date: January, 2006
Revision A2
User Manual
Add Group:
Create a new Tag-based VLAN. Input the VLAN name as well as VID,
configure the SYM-VLAN function and choose the member by ticking the
check box beside the port No., then, press the <Apply> button to have
the setting taken effect.
Fig. 3-32
Delete Group:
Just press the <Delete> button to remove the selected group entry from
the Tag-based group table.
Fig. 3-33
Edit a group:
Just select a group entry and press the <Edit> button, then you can
modify a group's description, SYM-VLAN and member set.
Publication date: January, 2006
Revision A2
84