Setting Of The Key Lock - JUKI LZ-2290 Series Manual Manual

(2) Setting of the key lock

!0
1) The contents of the key lock can be changed. There are two kinds of the key lock level, L_0 and L_1.
The level has been set to L_0 level at the time of delivery.
(1) Functions that cannot be locked at the L_0 level
1 ON/OFF of the automatic reverse feed stitching
2 Prohibition of thread trimming
3 Specifying the stop position
4 Bobbin thread counter
(2) Functions that cannot be locked at the L_1 level
1 Zigzag pattern
2 ON/OFF of the automatic reverse feed stitching
3 Prohibition of thread trimming
4 Specifying the stop position
5 Bobbin thread counter
7
@0
6
2) Setting procedure
(1) Pressing setting switch !0 , press detail setting
switch !1 to enter the detail setting mode.
(2) Press left blind stitch switch @ 0 . LED of left blind
stitch switch @0 flashes on and off and the level
of key lock is displayed in zigzag indicator 7.
(3) Change over the display with zigzag display
switch 6.
(4) Press setting switch !0 to determine the setting.
75
!1