5.2 Troubleshooting Guide
(11) Device not connect for SMDR
Error Code
Possible cause of
the malfunction
Countermeasures
Note
290
1203 : SMDR disconnect
1.
RS-232C cable is not connected.
2.
RS-232C cable is defective.
3.
Printer is turned off. (including out of paper)
Do you use SMDR?
Yes
Check above item 1), 2), 3).
No Problem
Replace the CPU card.*
End
*It is recommended to have a current copy of the programme on disk to
facilitate accurate and rapid recovery.
No
Assign SMDR Connection to "No"
in the system programming.
NG
Troubleshooting