2.7 Other Cards
2.7.4 TSW Conference Expansion Card (KX-TD50104)
This card is installed on the TSW card.
Connector
Connection to the TSW card
1.
Insert the 50/56-pin connector (plug) on the TSW CONF card into the 50/56-pin connector
(jack) on the TSW card.
2.
Install the TSW card into the Basic Slot 2 (BS2). Please refer to Section "2.3.2 TSW
Card."
164
TSWConference Expansion Card
50-pin connector
56-pin connector
(Plug)
Make sure the card is
in the correct direction.
50-pin connector
56-pin connector
(Jack)
TSW Card
"CONF" is marked.
Installation