2.7 Other Cards
2.7.6 Pay Tone Card (KX-TD50189)
Connection to the ELCOT card (KX-TD50180)
1.
Insert the connector (plug) on the Pay Tone card into the connector (jack) on the ELCOT
card.
2.
Move the pin jack on the CN11s toward OP direction.
3.
Install the ELCOT card into a free slot. Please refer to Section "2.5.11 ELCOT Card (KX-
TD50180)."
Note
• Four CO lines are available for the Pay Tone function with one Pay Tone card.
166
connector
(4-pin)
connector
(8-pin)
connector
(22-pin)
Connected to
Connected to
ELCOT ports 5-8.
ELCOT ports 1-4.
Pay Tone Card
Pay Tone Card
ELCOT Card
• This card is installed on the ELCOT card.
OP
4-pin connector
(plug)
8-pin connector
(plug)
22-pin connector
(plug)
22-pin connector
(jack)
4-pin connector
(jack)
8-pin connector
(jack)
OP
CN11
Installation