Panasonic KX-TD500 Installation Manual page 227

Error Message
RAM error
MODEM failure
OPX power failure OPX External Power Unit is not functioning
Bell power failure OPX Bell Power is not functioning properly.
OGM ROM error OGM controlling ROM on the DISA card is not
OGM RAM error OGM controlling RAM on the DISA card is not
OGM Rec / Play
failure
DSP link error
Frame IC error
ISDN power
failure
[Card/Port Test] Port Test – Operation
(Continued from step 5 of [Card/Port Test] – Operation (General).)
a)
Point to
b)
Specify the port number, or select "All."
c)
Click
Utility
[Card/Port Test] Card Test - Error Indication Table
Card RAM is not functioning properly.
MODEM is not functioning properly.
properly.
functioning properly.
functioning properly.
OGM Recording and Playing back are not
functioning properly.
Data link between the DSP card and the PBX is
abnormal.
ISDN Frame IC is not functioning properly.
ISDN power is not functioning properly.
in the Card/Port Test Menu screen and click.
• "Port Test" screen is displayed.
• If you select "All," all ports on the selected card will be tested at a time.
.
• After executing the test, the test result is displayed.
Example: When a DLC card is installed in the Slot No. 101
Description
4.2 Diagnosis
Card
Applied
RMT/
ERMT
OPX
OPX
DISA
DISA
DISA
E1
PRI30, BRI
BRI
227