Panasonic KX-TD500 Installation Manual page 125

Insert this card into a free slot 1, 5 or 9. Otherwise, this card will not function.
One T1 Digital Trunk card occupies two slots. If you assign a T1 Digital Trunk card to FS01,
FS02 is not available for other cards.
A maximum of eight KX-T96187 cards can be installed in the system.
T-1
PUSH
"T-1" is marked.
Connecting the Central Office Line
Insert the RJ-48C plug of the telephone line cord (4-conductor wiring) into the RJ-48C ack (T1
port on the KX-T96187).
To Channel Service Unit
(CSU) or Other KX-T96187
The installer must provide a CSU to connect the T1 line to the KX-T96187.
Installation
KX-T96187
22AWG : Under 10m (33 feet)
24AWG : Under 10m (33 feet)
R1 T1 R
T
(1)
(2) (4)
(5)
R1
}
T1
R
}
T
View of TEL Jack (CO)
Use 4-conductor wiring cord.
Receive
lead
Transmit
lead
2.5 Trunk Cards
T1 Port
T1 Digital Trunk card
(KX-T96187)
125