FuncMode - ValuDisp
Display the DMX 512 value of each channel.
1. Access the main menu by pressing MODE/ESC.
2. Press the UP/DOWN buttons until "FuncMode" is displayed and press ENTER.
3. Press the UP/DOWN buttons until "ValuDisp " is displayed and press ENTER.
4. Press the UP/DOWN buttons to select desired value (All Ch, Auto, Red, Gree,
Blue, Whit, Stro, Dimm, Macr, Temp).
5. Press ENTER to confirm selection.
FuncMode - SetSlave
Define the fixture as slave.
1. Access the main menu by pressing MODE/ESC.
2. Press the UP/DOWN buttons until "FuncMode" is displayed and press ENTER.
3. Press the UP/DOWN buttons until "SetSlave" is displayed and press ENTER.
4. Press the UP/DOWN buttons to select desired value (Slave 1, Slave 2, Slave 3).
5. Press ENTER to confirm selection.
FuncMode - AutoProg
Define the fixture mode (= Master, = Alone) for running Auto Programs. Select the
desired internal programs under "Sel Prog", set the number of steps under "Edit
Prog", and edit the individual scenes under "Edit Scen".
1. Access the main menu by pressing MODE/ESC.
2. Press the UP/DOWN buttons until "FuncMode" is displayed and press ENTER.
3. Press the UP/DOWN buttons until "AutoProg" is displayed and press ENTER.
4. Press the UP/DOWN buttons to select desired value (=Master, =Alone).
5. Press ENTER to confirm selection.
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 19
w w w . e l a t i o n l i g h t i n g . c o m /
/ / / / / / / / / / / / / / / / / / LEVEL Q7™ User Manual Version 2
Need help?
Do you have a question about the LEVEL Q7 and is the answer not in the manual?