Installing Your New Recorder; Basic Connections - JVC HR-E539EE Instructions Manual

INSTALLING YOUR NEW RECORDER

Basic
Connections
Aerial terminal
RF Cable
(provided)
Back of TV
AV-IN terminals
AV Cable
(not provided)
Mains Power Cord
Mains outlet
AUDIO OUT/VIDEO OUT
For HR-E539EE Owners:
If your TV has AUDIO IN L and R connectors, connect the
recorder to the L connector.
It's essential that your video recorder be properly connected.
Follow these steps carefully. THESE STEPS MUST BE COM-
PLETED BEFORE ANY VIDEO OPERATION CAN BE PER-
FORMED.
CHECK CONTENTS
1
Make sure the package contains all of the accessories
listed in "Specifications" (
SITUATE RECORDER
2
Place the recorder on a stable, horizontal surface.
CONNECT RECORDER TO
TV
3
The connection method you use depends on the type of
TV you have.
TV
RF CONNECTION
Aerial
To Connect To A TV With NO AV Input Terminals . . .
Cable
a– Disconnect the TV aerial cable from the TV.
b– Connect the TV aerial cable to the ANT. IN jack
on the rear panel of the recorder.
c– Connect the provided RF cable between the RF
OUT jack on the rear panel of the recorder and the
TV's aerial terminal.
AV CONNECTION
To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per "RF
CONNECTION".
b– Connect an optional AV cable between the
AUDIO OUT and VIDEO OUT connectors on the
rear panel of the recorder and the TV's AV-IN
terminals .
CONNECT RECORDER TO
MAINS
4
Plug the end of the mains power cord into a mains
Rear View
outlet.
3
EN
pg. 33).