Next Function Memory - JVC HR-E539EE Instructions Manual

14
EN
SCENE FINDER
1
4
7
REW
SCENE FINDER
OPERATE
2 3
5 6
8 9
0
STOP
C. MEMORY
PLAYBACK (cont.)
Scene Finder
This function helps you check contents of unlabeled recorded
tapes at the touch of a single button.
Search Search
FF REW FF
5 seconds 10 minutes 5 seconds
on counter
NOTE:
Scene Finder cannot be used when the recorder is in the Record
mode.
ACTIVATE SCENE FINDER
1
Press SCENE FINDER. The recorder starts forward high-
speed search for 5 seconds and then fast-forwards 10
minutes on the counter. This cycle is repeated until the
end of the tape is reached.
To start Scene Finder in the reverse direction, press
SCENE FINDER and then press the REW button
within 2 seconds. This cycle is repeated until the
beginning of the tape.
During Scene Finder, "PLAY" appears blinking on the
display panel. During fast forward or rewind, "
or " " appears on screen.
STOP SCENE FINDER
2
Press STOP.
NOTES:
During Scene Finder high-speed search, you can also hear the
tape sound. During fast forward or rewind, you hear the
current TV sound instead.
Scene Finder does not function during Index Search.

Next Function Memory

You can set your recorder's power to go off automatically after
the tape is fully rewound. Before starting, make sure the
recorder is in the Stop mode.
For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press OPERATE within 2 seconds.
NOTE:
If you want the power to be turned off automatically when the
counter reads "0:00:00" (instead of at the beginning of the
tape), press C.MEMORY so that the "M" mark appears before
pressing REW.
Search
REW FF REW
10 minutes 5 seconds
on counter
"