Edit From A Camcorder - JVC HR-E539EE Instructions Manual

Edit From A
Camcorder
1 2
4 5
7 8
0
NUMBER "0"
Recorder
VIDEO AUDIO
IN IN
AV Cable (not provided)
AUDIO OUT
Camcorder
VIDEO OUT
EDIT
Player
You can use a camcorder as the source player and your video
recorder as the recorder.
1
3
6
9
2
3
4
Your recorder
NOTE:
Connections made to the front panel AUDIO/VIDEO input
connectors automatically override those made to the rear panel
AUDIO/VIDEO input connectors.
To the rear panel PAUSE
connector
Editing Cable
(not provided)
MAKE CONNECTIONS
Connect the camcorder's AUDIO/VIDEO OUT
connectors to the recorder's front panel AUDIO/VIDEO
input connectors.
For HR-E639EE Owners . . .
When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO IN L connec-
tor on your recorder.
For HR-E539EE Owners . . .
When using a Hi-Fi camcorder, connect the
camcorder's AUDIO OUT L connector to the AUDIO
IN connector on your recorder.
When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder's instruction manual
for operating procedure.
SET RECORDER'S INPUT
MODE
Press NUMBER key "0". "F-AU"* appears in place of a
channel number.
* "AU" will appear with HR-E539EE.
START CAMCORDER
Engage its Play mode.
START RECORDER
Engage its Record mode.
IMPORTANT:
To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
PAL, SECAM and NTSC camcorders can be used as a
player for editing.
For more information on multi-system compatibility,
pg. 24.
23
EN