Instant Review; Repeat Playback; Counter Reset; Tape Position Indicator - JVC HR-S7500U Instructions Manual

POWER MENU
REVIEW
C.RESET
REW
STO P
Insta nt ReV iew
At the press of a button, you can power up your VCR, rewind the
tape and begin viewing the most recently recorded or timer-
recorded program.
ACTIVATE IN ST AN T REVIEW
After ensuring that the Timer mode is disengaged, press
1
REVIEW .
● The power comes on and the VCR rewinds to the index
code indicating the start of the last timer-recorded
program, then begins playback automatically.
● You can access a program 2–9 index codes away
from the current position on the tape. If, for example,
you have 5 programs recorded and you want to
watch the third one, press REVIEW three times.
● If necessary press
search visually to find the very beginning of the
desired program.
● If the tape is already rewound when
pressed, it will play the tape from the beginning. It
will not fast forward to an index code.
● The Instant Review function will also operate if the
VCR's power is on.
Downloaded from: https://www.usersmanualguide.com/
PAU SE
1 2 3
2
4 5 6
7 8 9
TIM ER
0
4
1
PAU SE
TIM E SCAN
REW or FF when play starts to
REVIEW is
Repea t Pla yba ck
ST ART REPEAT
Press and hold PLAY (until "
1
– + display panel) during playback, then release.
JOG
SHUTTLE
● The entire tape is played back 50 times.
STO P REPEAT
To stop, press STO P at any time.
2
N O TE:
PO W ER
Pressing PLAY , REW , FF , PAU SE or TIM E SCAN ™ or
£ also stops Repeat Playback.

Counter Reset

RESET CO UN TER TO ZERO
Press C.RESET .
1
N O TE:
By pressing the D ISPLAY button, you can change the
display to show the counter reading, channel number
or clock time. (Channel number is not displayed during
playback.)
FF
Ta pe Position Indica tor
The Tape position indicator
appears on screen when, from the
stop mode, you press FF , REW , or
use the TIM E SCAN SH U TTLE ring,
or perform an Index Search or
Instant ReView. The position of "
" in relation to "B" (Beginning) or
"E" (End) shows you where you are
on the tape.
N O TES:
● "SUPERIMPOSE" must be set to "ON", or the indicator will not
appear (
● It may take a few seconds for the Tape Position Indicator to be
displayed.
N ex t-Function M emory
The Next Function Memory " tells" the VCR what to do after
rewinding. Before continuing, ensure that the VCR is in stop
mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW , then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW , then press POW ER within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW , then press TIM ER within 2 seconds.
N O TE:
It is not possible to select the Automatic Timer functions if the
cassette's record safety tab is removed.
+ 8
4
0
6
–15dB
VCR
L R
NORM
B
pg. 28).
27
EN
" blinks on the front
SP
+ + +
E
COUNT 0:33:27