Table of Contents
Advertisement
Installation
5. Place the surround panel in front of the insert. Make sure the wingnut on the surround
panel is loosened 3 to 4 turns. Slide the control panel under the wingnut, push it in, then
slide it down into place. Tighten the wingnut to secure the control panel in place.
6. Carefully slide the surround panel over the hopper lid, taking care to prevent scratching.
When sliding the panel into place, lift up on the panel to prevent scratching (use plastic
from the stove packaging to prevent scratching).
© Travis Industries
(For Qualified Installers Only)
Make sure this wingnut
is loosened 3 to 4 turns.
Bottom of
control panel
4141230
21
100-01341
Advertisement
Table of Contents
