Table of Contents
Advertisement
12.3.5 ID MEMORY
7. ID MEMORY
10000/50000
7. ID MEMORY
-> 10000/50000
EVENT MEMORY
NOT EMPTY !!!
ID TOTAL COUNT
WRONG !!!
12.3.6 EVENT LIST
5. EVENT LIST
ID: 00000000
08100840242050A
MEMORY EMPTY!!
ID Memory allows you to decide how to divide the memory space
between IDs and event transactions. The total number of IDs and
event transactions combined is a maximum of 60,000. The default
setting is 10,000 users and 50,000 event transactions. If you increase
the maximum number of IDs, the maximum number of events
decreases in the same proportion, and vice versa. To change the
memory partition setting, press <ENT>, and press <4> or <6> to
select 10000/50000, 20000/40000, 30000/30000, 40000/20000 or
50000/10000 (No. of IDs / No. of Events), and then press <ENT>
again to confirm.
NOTE: The event memory must be emptied prior to changing
this setting. If you attempt to change the setting with some
event data still in the memory, the LCD will display "EVENT
MEMORY NOT EMPTY" error message.
NOTE: If you attempt to reduce the ID memory size to a value
lower than the current number of IDs stored in the memory, the
LCD will display the "ID TOTAL COUNT WRONG" error
message.
Event List allows you to check the past access events with
the information such as card number, time and date, etc.
The LCD displays the information of the access events as
R:1
follows; Card Number (ID), Reader Number (R: 1 – Reader
1), Event Date (YY/MM/DD), Day of the Week (4: Wed), Time
(hh/mm/ss), Access Status (0: Access granted) and Function
Key Value (A=F1).
Press <4> or <6> to view the information of the previous or
next event transaction. The "FIRST EVENT" or "LAST EVENT"
message will appear if you are viewing the first or last event. If
there is no event data, the LCD will display the "MEMORY
EMPTY" message.
49
Advertisement
Table of Contents
