IDTECK Finger007SRB User Manual page 10

Anti-Pass Back
Anti-Pass Back is a function that is used to prevent a user entering an area by using their card and
passing that card back to another person to use. If the Anti-Pass Back is applied, cardholders cannot
gain entry or exit twice in a row, and even if someone tailgates someone into the controlled area
without going through the proper authentication procedure, he or she will not be able to gain access
when exiting the area. If this is the case, the FINGER007SRB generates an error message without
granting access and then stores an Anti-Pass Back error record in the memory. You can also
program the FINGER007SRB to generate certain output signals in the event of an Anti-Pass Back
error.
External Input / Output
The FINGER007SRB has 4built-in inputs and 4outputs (2Relay Outputs and 2TTL Outputs) which
can be used for a wide variety of purposes and applications. For example, the input ports can be
used for interface with external devices such as Request-To-Exit Button, Fire Detection Sensor, etc.
while the relay output ports can be connected to a Door Lock and/or an Alarm System. When you
use Weigand output function, 26 Bit Weigand will be generated from dual TTL output.
Time Schedule
You can program 10 Time Schedules and apply one Time Schedule to each user. Each Time
Schedule has 8 different time zones from Monday to Sunday (7 Time Zones) and one holiday. Each
time zone has 5 different time codes so you can program 5 different time codes to each day. Also you
can program Time Schedule for individual inputs and outputs. Note that the Time Schedule for input
is activated time code for input device so that the input is activated during the time code on this Time
Schedule. Each Time Schedule is linked to one of holiday schedule and this linked holiday only
validates to holiday time code of the Time Schedule.
Access Time Limitation for Cardholders – You can assign a time schedule code to each
Cardholder during the card registration process. Cardholders are granted access only during the time
defined in the assigned time schedules. If a Cardholder attempts to gain access out of the set time,
access will be denied with a time schedule error.
Operating Time Limit for Input/ Output Ports – If you assign a time schedule code to an input/
output code, the Input/ Output Port generates constant output signals during the set time.
(For example, this feature can be used to keep a door open for a certain period of time.)
Operating Time Limit for Authentication Modes -If you set the FINGER007SRB to the RF + P/W
10