Table of Contents
Advertisement
12.2.12 LCD DISPLAY
12. LCD DISPLAY
STATUS
12. LCD DISPLAY
- > CARD NO
12.2.13 BUZZER STATUS
13. BUZZER STATUS
ENABLE
13. BUZZER STATUS
- > DISABLE
12.2.14 TTL WEIGAND
14. TTL WEIGAND
NOT USE
14. TTL WEIGAND
USE
LCD DISPLAY allows you to decide whether to display the
card number or the status message on the LCD when access
is granted or denied.
STATUS: The LCD will display the text message indicating
the status, i.e. "ACCESS GRANTED" or "ACCESS DENIED"
CARD NO: Display the number of the card.
To change the setting, press <ENT> and press <4> or <6> to
select "STATUS" or "CARD NO" and press <ENT> to confirm.
The buzzer generates a beep when a button on the keypad is
pressed, when a card is read, when an error occurs, etc.
To enable or disable the buzzer sound, press <ENT> and
press <4> or <6> to select "ENABLE" or "DISABLE" and
press <ENT> to confirm.
NOTE: The buzzer beeps regardless of this setting, when you
exit the Setup Mode, when a memory alarm is activated, or
when Buzzer Output is defined in "In/Output Define".
This function allows you to choose whether to use TTL output
as Weigand output. The default is "NOT USE"
To change the setting, press <ENT> and press <4> or <6>, then
press <ENT> to confirm.
CAUTION: if you choose "USE" and enter "IN /OUT DEFINE",
TTL 1 and 2 setting values will be initialized to "00" in the
"IN/OUT DEFINE"
45
Advertisement
Table of Contents
