Elapsed Recording Time - JVC HR-A637E Instructions Manual

16
EN
1
4
7
C.RESET
q 6
DISPLAY
2
2 3
5 6
8 9
0
RECORDING (cont.)

Elapsed Recording Time

Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
1
Press DISPLAY so that a counter reading appears on the
dispay panel.
If you press DISPLAY again, clock display appears.
RESET COUNTER
2
Press C. RESET before starting recording or playback.
The counter is reset to "0:00:00" and shows the exact
elapsed time as the tape runs.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
START RECORDING
1
Press RECORD on the recorder.
ENGAGE ITR MODE
2
Press RECORD again. ITR blinks and 0:30 appears on
the front display panel.
SET RECORDING DURATION
3
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the
recorder's front panel.