JVC HR-A591U Instructions Manual

JVC HR-A591U Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-A591U:

Advertisement

LPT0661-001B
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder.
Before use, please read the safety information and precautions to
ensure safe use of your new VCR.
CAUTIONS
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING
:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION:
This video cassette recorder should be used with AC 120V~,
60Hz only.
To prevent electric shocks and fire hazards, DO NOT use any
other power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU
FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
VIDEO CASSETTE RECORDER
HR-A591U
INSTRUCTIONS
CAUTION:
Changes or modifications not approved by JVC could void user's
authority to operate the equipment.
Failure to heed the following precautions may result in damage
to the VCR, Remote or video cassette.
1 DO NOT place the VCR . . .
2. DO NOT block the VCR's ventilation openings.
3. DO NOT place heavy objects on the VCR or on the Remote.
4. DO NOT place anything which might spill on the top of the VCR
5. AVOID violent shocks to the VCR during transport.
For Customer Use:
• Cassettes marked "VHS" (or "S-VHS") can be used with this video
• This model is equipped with SQPB (S-VHS QUASI PLAYBACK)
• HQ VHS is compatible with existing VHS equipment.
• As an Energy Star® Partner, JVC has determined that this
...in an environment prone to extreme temperatures or humidity.
...in direct sunlight.
...in a dusty environment.
...in an environment where strong magnetic fields are generated.
...on a surface that is unstable or subject to vibration.
or on the Remote.
Enter below the Model No. and Serial No. which are located
on the rear of cabinet. Retain this information for future
reference.
Model No.
Serial No.
cassette recorder. However, S-VHS recording is not possible with
this model.
that makes it possible to play back S-VHS recordings with
regular VHS resolution.
product or product model meets the Energy Star® guidelines for
energy efficiency.
Printed in Thailand
K
4F21601B
02/01

Advertisement

Table of Contents
loading

Summary of Contents for JVC HR-A591U

  • Page 1 S-VHS recordings with regular VHS resolution. • HQ VHS is compatible with existing VHS equipment. • As an Energy Star® Partner, JVC has determined that this product or product model meets the Energy Star® guidelines for energy efficiency.
  • Page 2: Important Product Safety Instructions

    IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.
  • Page 3: Buttons, Connectors And Indicators

    d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
  • Page 4 B code signals. On-screen display If you press DISPLAY on the Remote, you can see the current VCR status on the TV screen. Press DISPLAY again to exit on-screen display. The indications are not recorded even if the VCR is in the recording mode.
  • Page 5: Initial Settings

    Set VCR channel To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel) when a TV is connected with the 75 ohm coaxial cable only.
  • Page 6: Tuner Setting

    VCR’s memory. In addition to normal VHF and UHF channels, this VCR can receive up to 113 Cable TV channels. To use this VCR with an antenna, set the TV/CATV menu option to the TV mode.
  • Page 7: Basic Playback

    VCR. • Do not apply too much pressure when inserting. • The VCR turns on, and the counter on the on-screen display is reset, automatically. • If the cassette’s record safety tab has been removed, playback begins automatically.
  • Page 8: Playback Features

    • If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the MENU VCR mode indicator lights on the display panel, to view the CLOCK SET TIMER REC SET program to be recorded.
  • Page 9: Recording Features

    Watching one program while recording another During recording… • If you connect the TV and the VCR only using the RF connection to view pictures from the VCR, press TV/VCR on the Remote so that VCR mode indicator goes off from the display panel.
  • Page 10 When setting the Timer Recording, press ENTER until the desired setting blinks, then re-enter the setting using SET –/+. When finished, press ENTER. NOTES: • The VCR cannot be used while the TIMER REC indicator ( ) is lit. • After a power failure or disconnection of the power plug, all programmed recording settings must be reset upon resumption of power.
  • Page 11: Other Functions

    INPUT, TV CH –/+ and TV VOL –/+) of a remote controllable JVC TV without setting. NOTE: • It’s not possible to operate a unit not equipped with a remote sensor. • This Remote can control a JVC TV only. MENU CLOCK SET TIMER REC SET AUTO REPEAT...
  • Page 12: Make Connections

    Editing You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.
  • Page 13: Before Requesting Service

    Try another tape. Aim it at the remote sensor. Operate within 15 feet (5 meters) reduce the light in the room. Clear the path of the beam. Replace the batteries. Insert correctly. Set to TV, or turn off the VCR power button.
  • Page 14: Specifications

    Specifications GENERAL Power requirement Power consumption Power on Power off Temperature Operating Storage Operating position Dimensions (W x H x D) Weight Format Maximum recording time VIDEO/AUDIO Signal system Recording/Playback system Signal-to-noise ratio Horizontal resolution Frequency range Normal audio Hi-Fi audio Input/Output TUNER Tuning system...
  • Page 15 Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.
  • Page 16: Warranty (Only In U.s.a.)

    WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period.

Table of Contents