Table of Contents
Advertisement
2.5 Front view
A Reset button
A brief press of the button will reset the device.
Holding the reset button pressed in for
approximately 10 seconds will reset the device and
restore the factory default settings when the button
is released.
B Status LEDs
Green and red LEDs for status display
C Control interface (RJ45)
Compatible with VSC Volume Source Control unit.
Pin
Description
1
Not connected
2
Not connected
3
Ground [GND]
4
RS-485 B
5
RS-485 A
6
IR signal input
7
Ground [GND]
8
V+ 10V, 100mA max
2.6 Rear view
D Speaker output (Plug b)
Pin
Description
1
Speaker -
2
Speaker +
E Ethernet port 10/100 PoE (RJ-45)
Standard RJ45 Ethernet socket with PoE power
(802.3af) input
Pin
Description
1
Tx + / PoE a+
2
Tx + / PoE a+
3
Rx + / PoE a-
4
PoE b+
5
PoE b+
6
Rx - / PoE a-
7
PoE b-
8
PoE b-
F Ethernet Status LEDs
Green LED for Link status.
Yellow LED for Activity status.
BARIX AG | 8/26
Advertisement
Table of Contents
