Updating The Device; Introduction; Checking The Current Version; Version Information - BARIX Extreamer P5 Product Manual

5 Updating the device

5.1 Introduction

Barix preloads all devices with firmware which is current at the day of production. Barix
constantly enhances the capabilities and functions and recommends to keep the firmware on
the devices up-to-date.
The Exstreamer P5 features the "Update over network" method to update the firmware using a
web browser.
Warning
If the network update is interrupted during the process (power or network loss) the device
might become dysfunctional or even unreachable.
The only other remedy is to ship the device back for reloading the devices firmware and
reverting settings to factory defaults.
Please keep that in mind when planning a remote "Update over network".

5.2 Checking the Current Version

To find out which version is currently installed check the informations next to the Barix logo on
the devices main web page using a standard browser.

Version information

"Firmware" shows the version and the release date of the loaded firmware.
"Web UI" shows the version and the release date of the Web User Interface.
"Bootloader" shows the version of the boot loader firmware.
"Setup" shows the version of the setup table in the configuration EEPROM.
"Song" shows the version and the release date of the audio support module.
"Filesystem" shows the version and the release date of the File system module.
BARIX AG | 16/26