Downloading The Latest Firmware; Introduction; Standard Firmware; Abcl Firmware Applications - BARIX Extreamer P5 Product Manual

Universal, multiformat ip audio decoder with amplifier, poe powered
Table of Contents

Advertisement

5.3 Downloading the latest firmware

Introduction

Barix ships the Exstreamer P5 preloaded with the application "Streaming Client".
Depending on your needs or your usage of the device an ABCL application or the Exstreamer
Standard Firmware might be the right choice. Follow one of the next two sections depending
on your choice.

Standard Firmware

To download a firmware version please visit www.barix.com.
In the menu on the left side click on "downloads"
In the center column click on "Streaming Client Firmware" in the section "Standard
Firmware".
In the section "Firmware Update Kits" verify if the version of the "Streaming Client Update
Kit" is higher then the currently loaded (see version information in previous section). If there is a
newer version click on the link to download it. Save the ZIP file and unpack it to a local drive.
In the section "Firmware Documentation" click on the release note and the user manual with
the same versions as the "Streaming Client Update Kit" that you downloaded in previous
step and read carefully before continuing with an upload to the device.

ABCL Firmware Applications

To download a firmware version please visit www.barix.com.
In the menu on the left side click on "downloads"
In the the center column under section "Special Applications" click on "ABCL Applications
(overview)" to get an overview or click on of the links below the overview to choose an
application directly.
Click the according link to download the ZIP file as well as the accompanying documents like
the release notes and the user manual. Save the ZIP file and unpack it to a local drive. Read
carefully the release notes and the user manual before continuing with an upload to the device.

5.4 Web Update Procedure

Calculate approximately 2 minutes to complete the "Web Update" procedure.
STEP 1
Open your web browser, type in the IP address of the Barix device and press Enter.
Example: "192.168.0.12"
STEP 2
Click on the UPDATE button to enter the update page. You will see the following screen:
BARIX AG | 17/26

Advertisement

Table of Contents
loading

Table of Contents