Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
Replacing the Presser Foot
The presser foot presses down on the fabric.
Presser foot precautions
Be sure to observe the following precautions
concerning the presser feet.
CAUTION
● Use the presser foot appropriate for the
type of stitch that you wish to sew,
otherwise the needle may hit the presser
foot, causing the needle to bend or break.
● Only use presser feet designed specifically
for this sewing machine. Use of any other
presser foot may result in injuries or
damage to the machine.
38
Replacing the presser foot
Replace the presser foot as described below.
"Sewing overcasting stitches using the optional side
cutter" (page 65).
a
Press
("Needle Position" button) once or
twice to raise the needle.
a "Needle Position" button
The needle is raised.
b
Turn off the sewing machine.
CAUTION
● Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if
button) is accidentally pressed and the
machine starts sewing.
c
Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.
1
("Start/Stop"
a
Advertisement
Table of Contents
