Brother 885-U26 Operation Manual page 112

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX
c Slide the bobbin winder shaft to the left, and
then remove the bobbin from the shaft.
d Hold the thread end with your left hand, and
wind off the thread clockwise near the bobbin
with your right hand as shown below.
e Wind the bobbin again.
Note
Make sure that the thread passes under the
pre-tension disk of the bobbin-winding
thread guide correctly (page 23).
110