4.10. Strobe Control Register - Imi Tech PEARL IMB-20FT User's Operation Manual

Page 54

4.10. Strobe Control Register

Base Address : 0xF2F23000h
Address Name
000h
004h
.
.
0FCh
100h
104h
110h
.
.
1FCh
200h
Strobe_CTRL_Inq Strobe_0_Inq
Strobe_1_Inq
Strobe_2_Inq
Strobe_3_Inq
Strobe_0_Inq Presence_Inq
ReadOut_Inq
On/Off_Inq
Polarity_Inq
Min_Value
Max_Value
Strobe_1_Inq
Strobe_2_Inq
Strobe_3_Inq
Strobe_0_Cnt Presence_Inq
ON_OFF
Signal Polarity
Field Bit
[0]
[1]
[2]
[3]
- [4..31]
Reserved
[0]
- [1..3]
[4]
[5]
[6]
- [7]
[8..19]
[20..31]
Same definition to Strobe_0_Inq
Same definition to Strobe_1_Inq
Same definition to Strobe_2_Inq
Reserved
[0]
- [1..5]
[6]
[7]
P i o n e e r i n D i g i t a l V i s i o n T e c h n o l o g y
PEARL SERIES Operation Manual
Description
Presence of strobe 0 signal
Presence of strobe 1 signal
Presence of strobe 2 signal
Presence of strobe 3 signal
Reserved
Presence of this function
Reserved
Capability of reading the value of this
feature
Capability of switching this function ON
and OFF
Capability of changing polarity of the
signal
Reserved
Minimum value of this function control
Maximum value of this function control
Presence of this function
0: N/A 1: Available
Reserved
Write : ON or OFF this function
Read : read a status 0: OFF, 1: ON
if this bit=0, other fields will be read only
Select signal polarity
If Polarity_Inq is "1" Write to change
polarity of the strobe output Read to get
polarity of the strobe output