Basic Installation; Recommended System Requirement; Hardware Installation - Imi Tech PEARL IMB-20FT User's Operation Manual

PEARL SERIES Operation Manual
2.

Basic Installation

The Pearl Series operates in connection with a PC running an operation system such as MS Windows or Linux.
Basic installation consists of driver installation, connecting the camera and loading the demo application software.
Please refer to the demo application software manual for details.
2.1.

Recommended System Requirement

Requirements
Operating System
CPU
System Memory
Video Adapter
Hard Disk Drive
Optical Drive
TM
FIREWIRE
Cable
Software
Remark : Other software or hardware may be required for user specific applications.
2.2.

Hardware Installation

Basic camera installation is a very simple 3-STEP Process as follows. ( Also check the figure below )
STEP 1. Turn to the back of the computer and locate the FIREWIRE port.
(Note : some might have FIREWIRE port in the front)
STEP 2. Plug one end of the FIREWIRETE cable to the computer's FIREWIRE port.
STEP 3. Plug the other end of the FIREWIRET cable to the camera's FIREWIRE port.
P i o n e e r i n D i g i t a l V i s i o n T e c h n o l o g y
Details and Description
Windows 2000(SP4), Windows XP(SP2) or higher
Intel Pentium 4 1.5 GHz or equivalent AMD CPU or higher
256 M Byte or more
1280 x 1024 with 24 bit color or higher
40 GB or higher
CDROM or DVDROM
TM
FIREWIRE OHCI PCI or PC-Card Adaptor
TM
Standard FIREWIRE 6P-6P cable or 4P to 6P cable ( for Notebooks )
DirectX 9.0 or higher ( 9.0b or higher for Windows XP ) IMI Tech Digital Imaging CD
(ImCam Application and Driver ) or other Windows Application such as amcap.exe
Basic
Hardware Installation
and
Camera Connection
Page 11