Before You Start - Imi Tech PEARL IMB-20FT User's Operation Manual

Pearl series firewire ccd & cmos cameras
Table of Contents

Advertisement

Before You Start

This manual should help you in the installation and setting up of the camera; and we recommend that you carefully follow the
instructions described. To ensure that your warranty remains valid, please read the manual carefully before using the camera.
DO NOT disassemble, modify or repair the camera. There is no user serviceable part inside and disassembling the camera may
void the warranty. For prevention of fire or electric shock, DO NOT remove screws or covers from the camera.
Operation in a wet environment is NOT recommended and the camera SHOULD NOT be exposed to rain or moisture.
For prolong life and the protection of the camera's CCD, do not point the camera directly at the sun or a strong spotlight which
may result in CCD blooming and permanent damage.
DO NOT operate the camera beyond the operation temperature range stated and AVOID usage in conditions exceeding 90%
humidity.
DO NOT use an unregulated power supply source to prevent damage to the camera's circuits.
Use soft materials such as lens tissue or a cotton tipped applicator with ethanol for CCD faceplate cleaning ONLY when
necessary and AVOID contact with fingers or any hard object. Do not use solvent, abrasives or detergent when cleaning the
camera body.
Warranty shall be voided for improper use of the camera or fault caused by the user or damage caused by other equipment due
to negligence
Warranty
IMI TECH warrants the original components free of defects for one year from purchase date. This warranty covers failures and
damage due to defect, which may occur during normal use. It does not cover damages or failure resulting from mishandling,
abuse, misuse or modification. An RMA number must be obtained in advance for every repair or replacement.
Disclaimer
The information in this document has been carefully checked and is believed to be reliable. However, IMI TECH assumes no
responsibility for inaccuracies. There is no legal obligation to document internal relationships in any functional module of its
products, in either hardware or software.
Copyright
All the materials in this document are protected by copyright and other laws for intellectual property. They are not allowed to
be copied, reproduced or modified for any use without the permission of IMI Tech. IMI TECH reserves the right to make
changes in specifications, functions or designs at any time and without any notice. The company names in this document may
be the trademarks and trade-names of their respective owner; and are hereby acknowledged.
Copyright © 2005 IMI TECHNOLOGY CO.,LTD. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents