JVC dla-x3 User Manual page 35

3
Adjustments and settings in the menu (continued)
[1-2] Advanced
Sharpness
NR
RNR
MNR
BNR
X3
Color Space
Standard
Wide 1
Wide 2
Custom Gamma
Color Management
X7 X9
Clear Motion Drive
Off
Mode 1
Mode 2
Mode 3
Mode 4
Film motion
CMD Demo
Left
Right
Top
Down
Off
Lens Aperture
48
Operation
You can set the sharpness and detail enhance to "[1-2-1] Sharpness" of the submenu
Reduces the noise of the video images. Please adjust to your preference.
Adjusts the intensity of random noise elimination of the image.
Values: (Low) 0 to16 (strong)
Adjusts the intensity of mosquito noise elimination of the video images.
(*) It is not possible to set it when the "Picture Mode" is set to "3D".
Moreover, it is not possible to set it when there is an input of HD input signals.
Values: (Low) 0 to16 (strong)
Reduces the block noise of the video images.
(*) ) It is not possible to set it when the "Picture Mode" is set to "3D"
Moreover, it is not possible to set it when there is an input of HD input signals.
Settings: On, Off
You can switch the color space display of the projector output.
Settings: Standard, Wide 1, Wide 2
Equivalent to the HDTV color space
Equivalent to the color space of the DCI standard
A color space that is broader than Wide1
It is possible to set the gamma curve and save it. Please adjust to your preference.
To "[1-2-2] Custom Gamma" of the submenu
It is possible to set the color of the screen to the preferred color and save it.
To "[1-2-3] Color Management" of the submenu.
It improves video images with fast movements to produce clear video images with little
residual image retention.
For PC and 3D signals, the "Clear motion Drive" cannot be set.
Moreover, the images in some scenes may be distorted. In such a case, please select
"Off".
Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Film motion
Off
Black insertion weak
Black interpolation strong
Interpolation weak
Interpolation strong
With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image
footage is changed to a 24 frame display.
(*) 24p will not function.
It is possible to confirm the effect of the setting of Mode 3 and Mode 4 of the Clear motion
drive. Upon pressing the button "OK", it will be displayed on all sides of a screen in the
center split into two parts. Finally, it will turn to "Off". It cannot be set for PC and 3D
signals.
Settings: Left -> right -> top -> down -> Off (changed with "OK" button)
The left screen displays a demonstration of the Clear motion drive.
The right screen displays a demonstration of the Clear motion drive.
The upper screen displays a demo of the Clear motion drive.
The screen below displays a demo of the Clear motion drive.
The Demo of the Clear motion drive is turned off.
Adjusts the amount with which the optical iris is squeezed. A setting of 0 means fully
opened.
Settings: (Dark) -15 to 0 (bright)
[0]
[0]
[Off]
[Off]
[Off]
[0]