Controls and features (continued)
Main body - Rear
⑤ Inlets
⑧ Input
terminal
⑫ Power input
terminal
⑧ Input terminal
There is also a terminal other than the input
terminal for video images, such as those used
for controlling or optional equipment. This
illustration is
X7 X9
terminals" for detailed information
terminals. (Reference page: 18)
⑨ Lamp Cover
When replacing the light source lamp, remove
this cover. (Reference page: 60)
⑩ Operation panel
See the following illustration "Control panel" for
more details.
■
To display the menu
⑩ Operation panel
⑪ Light receiving section
. Please see "About input
X3
about
Operation panel
Left button
Down button
MENU
of the remote control (rear)
⑪ Light receiving section of the
remote control (rear)
Please aim the remote control at this section
when using.
* There is also a light receiving section at the
rear.
⑫ Power input terminal
This is the power input terminal. It is
connected via the supplied power cord.
(Reference page: 31)
STANDBY/ON
To turn on/off the power
INPUT
To switch input
OK
To select or confirm
Up button
Right button
BACK
To return to the previous menu
ENGLISH
⑤ Inlets
⑨ Lamp Cover
15