JVC dla-x3 User Manual page 18

About the connection (Continued)
Connection of the power cord (provided)
Once you have connected the equipment, connect the projector power cord.
1 HDMI 2
C R/ P R C B/ P B Y
RS-232-C
3D REMOTE
PC TRIGGER
SYNCHRO CONTROL
1
Power Cord
(Supplied)
2
Be carful to avoid fire and electric shocks
As the amount of electrical energy for this unit is large, please connect it directly into
●
the wall outlet.
When you are not using the equipment, please unplug the power cord.
●
CAUTION
Connect it only with the provided power cord.
●
Do not use voltage other than the indicated power voltage.
●
Do not damage, break or modify the power cord. Moreover, the power cord will be
●
damaged if you place it under heavy objects, heat or pull it.
Do not unplug with wet hands.
●
1 Connect the power cord supplied with the
STANDBY/ON
unit power input terminal
INPUT
OK
2 Connect to the power outlet
MENU BACK
ENGLISH
31