Important: While the Evolution engine is extremely easy to operate, if this is your first experience flying a model airplane, 1.20NX Evolution Engines Specifications ..............11 it is highly recommended that you have the help of an experienced modeler during the first few flights. Your local hobby store or flying club can put you in touch with an experienced pilot in your area.
Mounting the Engine Glow Plug Muffler Nipple Muffler Using the included muffler mounting screws and lock Fuel Nipple washers, attach the muffler with the included hex wrench. Be sure the lock washers are placed over the screws and that one gasket is placed between the muffler and the engine.
Attaching the Fuel Lines Attaching the Propeller and Spinner Starting the Evolution Engine Select a servo arm that has a hole located 11mm or 7/16" out from center and attach the other end of the Fuel throttle linkage (see photos below). We recommend using high quality Cool Power, Omega or Power Master fuels containing 10 to 15% Nitro.
Step 5. Attach the glow driver. airplane. Carefully pinch and release the fuel line Step 2. Low-Speed Needle Adjustment, cont. C. Retighten the setscrew on the ring of Step 6. Turn the engine over using an electric starter. to temporarily restrict the fuel flow. the SetRight assembly and you have The engine should fire within seconds of applying 4.
If you need additional help or have any questions, please call fuel to stay at home in a controlled storage environment, • W orn out glow plug Horizon’ s Support Team. Horizon has trained technicians who virtually ensuring problem-free fuel. - Replace with new EVOGP1 glow plug are qualified to answer your engine questions.
Questions, Assistance, and Repairs accordingly. Please note: non-warranty repair is only concerns regarding this product or warranty. hereunder shall be that Horizon will, at its option, (i) Your local hobby store and/or place of purchase available on electronics and model engines.
Need help?
Do you have a question about the 1.20NX Evolution and is the answer not in the manual?
Questions and answers