Caller Id Card (Kx-Td193) - Panasonic KX-TD500 Installation Manual

2.7 Other Cards
Table 27
doorphone 3
door opener 3
doorphone 4
door opener 4
Note
• Only the telephone which received the doorphone call and in conversation can open the door
using door opener. System program determines the telephones that can receive the
doorphone calls and use the door opener.

2.7.4 Caller ID Card (KX-TD193)

This card is installed on the ELCOT card.
Caller ID Card
Connection to the ELCOT card (KX-TD50180)
Before connecting the Caller ID card (KX-TD193) to the ELCOT card (KX-TD50180), please
replace the spacers on the KX-TD193 with the short type spacers included in the package.
Removing the spacers[Figure a]
Push up a spacer ( See step 2 .) while holding it with fingers (See step 1 .) as shown in the figure
below.
Adding the short type spacers[Figure b]
Pull the spacer until "CLICK" sounds as shown in the figure below.
1.
Insert the connector (plug) on the Caller ID card into the connector (jack) on the ELCOT
card.
134
Paired
Paired
connector
8-pin
connector
22-pin
Figure 103:
Installation