Backup; Download (From Pbx To Pc) - Panasonic KX-TD500 Installation Manual

3.6 Backup

3.6 Backup
3.6.1 Backup
Backup is a procedure where a copy of the system programming data is stored on an external
storage medium, such as a floppy disk.
If it becomes necessary to re-initialize the system programming data, it will be faster to reload
from disk than by manual re-input.
This subsection describes a backup procedure of system programming data at on-site using a
PC (Windows machine) via RS-232C cable.
Backup can be categorized as follows:
Download (from TD500 to PC)
Downloading system programming data from the KX-TD500 System to the PC at on-site can
be done during on-line mode as well as off-line mode.
Upload (from PC to TD500)
Uploading the system programming data from the PC to the KX-TD500 System can be done
during off-line mode only.

3.6.2 Download (from PBX to PC)

Operation
1.
Point to "File" in the Main Menu and click.
• The "File" drop-down menu is displayed.
2.
Click "Download load to PBX" in the drop-down menu.
• Downloading the system programming data from PBX to PC begins.
3.
Point to "File" in the Main Menu and click.
• The "File" drop-down menu is displayed.
4.
Click "Save as..." in the drop-down menu.
• "Save As" dialog box is displayed.
182
Figure 154:
Maintenance Console Guide