Panasonic KX-TD500 Installation Manual page 229

4.5 Error Log
Error Code Error Message
#1201 Expansion shelf 1 AC
power down
#1202 Expansion shelf 2 AC
power down
#1203 SMDR disconnect
00 Echo back error
01 LPR ROM failure
02 LPR RAM failure
03 Card disconnect
04 LPR modem failure
06 LPR memory checksum
error
07 LPR runaway
08 Card start up error (Reset
Notice)
09 Card start up error (Sync
Ans)
10 Card start up error (Card
Kind)
11 Card start up error
(Download)
230
Table 68
The Expansion shelf AC power malfunction occurs for
the following reasons.
a)
Power Failure
b)
Malfunction of Power Supply Unit of the
Expansion Shelf 1, or the trouble with the Power
Supply System (Backboard, CPU card) of the
Shelf
The Expansion shelf AC power malfunction occurs for
the following reasons.
a)
Power Failure
b)
Malfunction of Power Supply Unit of the
Expansion Shelf 2, or the trouble with the Power
Supply System (Backboard, CPU card) of the
Shelf
SMDR disconnects for the following reasons.
a)
RS-232C cable is not connected.
b)
RS-232C cable is defective.
c)
Printer is turned off. (including out of paper)
No answer from the card when the PBX executed Echo
Back test.
LPR ROM checksum error occurs
LPR RAM failure occurred.
Card disconnects because of card connection error or
defective CPU card.
LPR modem failure occurred.
LPR memory checksum error occurs because of defective
LPR RAM.
LPR runaway occurs when the LPR software executed
illegal instruction.
The PBX couldn't reset the card properly.
The PBX synchronized with the card in vain.
The PBX received illegal card type from the card
The PBX received data downloading error from the card.
Cause
Utility