Table of Contents
Advertisement
Thermalcote bonding compound
Power connection information
Typical AC plugs
250V
E
L
N
BS1363A
U. K.
Austria Belgium
Finland France
Italy Germany
Sweden Norway
Procedure
The thermal bonding compound used between the system processor and its
heatsink can cause skin irritation and stain clothing. Avoid prolonged or
repeated contact with skin. Wash thoroughly with soap and water after
handling. Avoid contact with eyes and inhalation of fumes. Do not ingest.
250V
E
N
L
SHUCO
NEMA 5-15P
Thailand
Holland
Note
Note
Any ancillary equipment using an AC power supply cable should be earthed.
The power supplies in the computer and the monitor are correct for the
country in which the system is first sold. Do not alter any switch settings
on the rear of the system. If you wish to use the computer in another
country it may not be suitable, contact your supplier or an authorised
Apricot dealer.
♦
Before connecting up any parts of the system, ensure that the AC
supply is switched off or disconnected.
♦
First connect up the keyboard, mouse, monitor signal cable, and
audio cables as appropriate.
♦
Connect up all AC cables. (System to supply, system to monitor, all
related peripherals.) Then switch on or connect the AC supply.
♦
Switch on the monitor first, then the computer followed by the
peripherals, such as printer or speakers.
SAFETY AND REGULATORY NOTICES
125V
E
N
L
SRAF 1962/DB16/87
Taiwan
Japan
USA
Canada
250V
N
L
E
Denmark
250V
ASE 1011
Switzerland
iii
Advertisement
Table of Contents
Troubleshooting
