Mitsubishi Electric Apricot LS660 Owner's Handbook Manual page 16

Main panel
1. Unlock the cover with the special key provided. It can be
found on the rear of the system.
2. Release the appropriate panel screws.
3. Slide the panel carefully towards the rear of the system using
the handle provided.
4. After about 2 to 3 cm movement it is possible to lift the panel
vertically clear of the system.
The motherboard and all of its components are now accessible.
Caution Caution
Exercise care with the removed panels as there are metal fixings and
hooks on the inside. These may scratch delicate surfaces.
Top panel
1. First remove the main side panel as detailed above.
2. Remove the top panel retaining screw.
3. Again slide the panel towards the rear of the system.
4. After 2 to 3 cm the panel should be free to lift off.
You can now safely access or fit expansion cards.
LS/VS660 OWNER'S HANDBOOK
F i r s t s t e p s
1/7