To Memorize Channels - JVC TV 13142 User Manual

TO MEMORIZE CHANNELS

This TV/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed
into the TV/VCR's memory. In addition to normal VHF and UHF channels, this TV/VCR can receive up to 113 Cable
TV channels. To use this TV/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped
from the factory, this menu option is in the CATV mode.
TV/CATV SELECTION
1
Press the MENU button.
3
Press the SET + or – button
to select the TV/CATV mode.
SET
SET
CH SET-UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/–/ENTER/MENU
MENU
2 3
2 4
4
Press the ENTER button
to select the TV or CATV
mode. The arrow indicates
the selected mode.
TV
CATV - Cable TV channels
2
Press the SET + or – button to select the CH
SET-UP mode, then press the ENTER button.
SET
SET
ENTER
- VHF/UHF channels
ENTER
M E N U
TIMER REC SET
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
+/–/ENTER/MENU
1 5
5
Press the MENU button until
the MENU screen is cleared.
MENU
21