Instant Timer Recording (Itr) - JVC TV 13142 User Manual

INSTANT TIMER RECORDING (ITR)

The Instant Timer Recording feature provides a simple and convenient way to make a timed recording.
EXAMPLE: Instant timer recording for 30 minutes.
1
Press the POWER button
to turn on the TV/VCR.
POWER
6
4
Set the TV/CATV option
to the appropriate setting.
TV - VHF/UHF channels
CATV - CABLE TV channels
NOTE: • Press both the REC button and the PLAY button to increase the time needed for recording. (See the chart
below.)
Press once
NORMAL REC
Recording time
• To cancel Instant Timer Recording, press the STOP button.
• The TV/VCR channel cannot be changed during recording.
2
Load a video cassette with the
erase prevention tab intact.
3
Press the Direct Channel
5
Selection buttons to select
the channel to be recorded.
(Example: Channel 12) Or press and
release the CHANNEL + or – button.
(See page 17.)
0 1
twice 3 times 4 times
0:30 1:00 1:30
3
Press the SP/EP button to
select the desired tape
speed (SP or EP). SP or EP
will appear on the screen for 4 sec-
onds. (See page 28 for more
information on tape usage.)
Press the REC and PLAY
6
buttons simultaneously to
begin recording. Press the
both buttons again to stop recording
after 30 minutes. Each additional
press of the both buttons will
increase recording time as shown
2
below, up to a maximum of 5 hours.
"ITR" will appear on the screen.
REC
CH 012
5 times 6 times 7 times
2:00 3:00 4:00
SP/EP
1
5
PLAY
ITR 0 : 30
CH 012
8 times 9 times
5:00 NORMAL REC
39