Antenna Connections - JVC TV 13142 User Manual

ANTENNA CONNECTIONS

If you are using outdoor antenna (outdoor antenna not included), follow the instructions below that
correspond to your antenna system. If you are using a cable TV service (CATV), see page 12 for Cable TV
connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
75 OHM
COAXIAL
CABLE
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)
COMBINER
(not included)
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
UHF 300 ohm
300-75 OHM
MATCHING
TRANSFORMER
(not included)
300-75 OHM
MATCHING
TRANSFORMER
(not included)
VHF 300 ohm
UHF 300 ohm
COMBINER
(not included)
VHF 75 ohm
Connect the 75 ohm cable from the combination VHF/
UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300 ohm
twin-lead wire, the use of the 300-75 ohm matching
transformer may be necessary.
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300 ohm
twin-lead wire to the 300-75 ohm matching trans-
former. Attach the transformer to the combiner, then
attach the combiner to the antenna jack.
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner. Attach the combiner
to the antenna jack.
11