Tv Operation - JVC TV 13142 User Manual

TV OPERATION

1
To turn on the TV/VCR,
press the POWER button.
POWER
2
4
Press the Direct Channel selection buttons to select the channel.
TV mode direct channel selection
When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two
buttons. (for example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for
a few seconds.) For channels 10 and above, press the 2 digits in order.
CATV mode direct channel selection
When the TV/CATV menu option is in the CATV position, channels can be selected as follows:
TO SELECT CATV CHANNELS:
1-9 Press "0" twice, then 1-9 as needed. Example, to select channel 2, press "002".
10-12 Press "0", then the remaining 2 digits. Example, to select channel 12, press "012".
13-99 Press the 2 digits in order. Example, to select channel 36, press "36".
100-125 Press the 3 digits in order. Example, to select channel 120, press "120".
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.
•
NOTE: If a channel with no broadcast is selected, the sound will automatically be muted.
•
If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
2 Adjust the volume level by
pressing the VOLUME + or –
button. The volume level will
be indicated on the screen by green
bar. As the volume level increases,
so do the number of bar. If the
volume decreases, the number of
green bar also decreases.
VOL VOL
VOLUME
1
3
Set the TV/CATV menu
option to the appropriate
position. (See page 21.)
TV - VHF/UHF Channels
CATV - CABLE TV Channels
32
VHF/UHF/CATV CHANNELS
TV
VHF
2-13
UHF
14-69
4
0
CATV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
1 2
CH 012
17