MANUAL CLOCK SETTING
You must set the date and time manually for timer recordings, ON/OFF Timer and Daylight Saving Time if
the Auto Clock process did not set them correctly.
EXAMPLE: Setting the clock to "8:30 AM", 23th (TUE) January, 2001.
1
Press the MENU button.
Press the SET + or – button to select the SYSTEM
SET-UP option, then press the ENTER button.
MENU
•
If you press the MENU button
before the clock is not set,
SYSTEM SET-UP screen will
appear. See step 2 in this case.
3
Press the SET + or – button
to set the month, then press
the ENTER button.
ENTER
SET
SET
CLOCK SET
MONTH
DAY
YEAR
TIME
+/—/ENTER/CANCEL/MENU
•
NOTE:
After a power failure or disconnection of the power plug, the time display will be lost. In this case, set the
present time again if the Auto Clock did not set correctly.
•
If you want to correct the digits while setting, press the CANCEL button until the item you want to correct,
then press the SET+ or – button to correct the desired setting.
16
ENTER
SET
SET
M E N U
TIMER REC SET
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
+/–/ENTER/MENU
1
2 3 4
4
Set the day, year and time
as in step 3.
SET
SET
1
1 (SAT)
2000
12 : 00 AM
2
Press the SET + or – button to select the CLOCK
SET option, then press the ENTER button.
ENTER
SET
SET
After setting the clock, date and time
starts functioning automatically.
ENTER
CLOCK SET
MONTH
1
DAY
23 (TUE)
YEAR
2001
8 : 30 AM
TIME
+/—/ENTER/CANCEL/MENU
SYSTEM SET-UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/–/ENTER/MENU
1
8 : 30 AM TUE