Advertisement
PAGE 7
SYSTEM WIRING
SYSTEM PROGRAMMING - Menu 1
BLUE
(-) OUTPUT WHEN THE UNLOCK IS PRESSED FOR 1 SECOND.
PIN 3
RED
(+) OUTPUT FOR VOLTAGE INVERTER ONLY.
PIN 2
GREEN
(-) OUTPUT WHEN THE LOCK IS PRESSED FOR ONE SECOND.
PIN 1
WHITE/
(-) OUTPUT WHEN UNLOCK IS PRESSED TWICE WITHIN 3 SECONDS.
PIN 10
GREEN
YELLOW
(+) SWITCHED IGNITION INPUT. THIS WIRE MUST BE CONNECTED.
PIN 9
BLUE
(-) SWITCH INPUT FOR HOOD OR TRUNK SWITCH.
PIN 8
GREEN
(-) DOOR PIN SWITCH INPUT FOR DOOR PIN DETECTION.
PIN 7
PURPLE
(+) DOOR PIN SWITCH INPUT FOR DOOR PIN DETECTION.
PIN 6
BLACK/
(-) OUTPUT FOR 30 SECONDS AFTER THE UNLOCK BUTTON IS PRESSED.
PIN 5
WHITE
ORANGE
(-) CONTINUOS OUTPUT WHEN THE LOCK BUTTON IS PRESSED.
PIN 4
GRAY
(-) OUTPUT WHEN THE UNLOCK BUTTON IS HELD FOR 3 SECONDS.
PIN 3
WHITE/ BLUE
(-) OUTPUT FOR FACTORY HORN HONK ACTIVATION.
PIN 2
(-) OUTPUT WHEN THE # BUTTON IS HELD FOR 3 SECONDS.
PINK
PIN 1
WHITE
OUTPUT FROM PARK LIGHT RELAY. (+) OR (-)
PIN 5
BLACK
SYSTEM GROUND INPUT. CONNECT TO CHASSIS GROUND.
PIN 4
RED
SYSTEM 12VOLT SUPPLY. CONNECT TO CONSTANT 12 VOLT SOURCE.
PIN 3
BROWN
OUTPUT FOR SIREN ACTIVATION. (+) 2AMP MAX.
PIN 2
WHITE
PARK LIGHT INPUT. CONNECT TO (+) FOR (+) OUTPUT OR (-) FOR (-) OUTPUT
PIN 1
BROWN
CUT THE STARTER WIRE AND CONNECT TO THE KEY SIDE.
PIN 2
CUT THE STARTER WIRE AND CONNECT TO THE MOTOR SIDE.
BROWN
PIN 1
650 SERIES
INSTALL MANUAL
Advertisement
