Advertisement
650 SERIES
INSTALL MANUAL
SETTING 7 - HORN/ AUX 4
THE SIREN WILL CHIRP 7 TIMES WHEN SETTING 7 IS SELECTED
CHANGE SETTING 4 -
GOTO SETTING 5 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
DEFAULT SETTING
3 CHIRP
SETTING 8 - HOOD PIN / DISCONNECT
THE SIREN WILL CHIRP 8 TIMES WHEN SETTING 8 IS SELECTED
CHANGE SETTING 5 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 6 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
DEFAULT SETTING
2 CHIRP
SETTING 9 - 2nd UNLOCK/ (-) W/DISARMED
THE SIREN WILL CHIRP 9 TIMES WHEN SETTING 9 IS SELECTED
CHANGE SETTING 9 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO BACK TO SETTING 1 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
DEFAULT SETTING
2 CHIRP
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – Pulsed- The Auxiliary output will activate for .75
seconds.
SETS OPTION 2 –Medium - The Horn output will activate for 20ms when
a function is preformed.
SETS OPTION 3 – Horn- The output will activate as a horn output when
a function is preformed.
SETS OPTION 1 – Disconnect- The input will trigger the alarm when it is
disconnected from ground. Can be used for trailer disconnect detection.
SETS OPTION 2 – Hood Pin- The input will trigger the alarm when
grounded. Connect to hood or hatch pin on vehicle.
SETS OPTION 1 – (-) When Disarmed- The output will switch to ground
when the alarm is disarmed.
SETS OPTION 2 – 2nd Unlock - This output will activate when the unlock
button is pressed 2 times within 3 seconds.
SYSTEM PROGRAMMING - Menu 1
SHOCK SENSOR
PRESS
7 CHIRP
7 TIMES
PRESS
8 CHIRP
8 TIMES
PRESS
9 CHIRP
9 TIMES
PAGE 14
X7
X8
X9
Advertisement
